As the trend toward restoring older homes continues, more and more people are turning to our hardwood floor refinishing service to renew their beloved floors. Hardwood floors provide years of low maintenance beauty, yet they are relatively affordable and easy to restore. Because we keep our pricing affordable and we aim for the most competitive dry times, you can count on Fabulous Floors Oakland-Macomb to deliver the finest hardwood floor refinishing services in Oakland-Macomb and the surrounding areas. What’s more, refinishing your floors rather than replacing them completely can save thousands of dollars and increase the property’s value.
The Hardwood Floor Refinishing Process
STEP 1: Remove Carpet
If carpet is present, we scrape bonded pads such as carpet by hand with a putty knife. We take care to follow the grain of the wood and to not gouge as we scrape. We use a chemical solvent can to speed the process and we remove the left over carpet staples with needle nose pliers. Once existing flooring materials have been cleared, the hardwood floor refinishing can begin.
STEP 2: Sand Nicks & Scratches
Our dustless sanding process ensures that a minimal amount of dust is created as we prepare your floors for staining. We start sanding with the coarsest grit of sandpaper and perform three passes, using a finer grit each time. Our technicians are talented and respectful when working on the floors and they’ll be sure to move with the grain of the wood as much as possible. This will help to avoid uneven patches and ensure a spectacular finish. Since corners are often sanded too much as the machine passes over them repeatedly and there will always be awkward patches where the sander can not reach, the only choice is to do these patches by hand, using the same progression of coarse to fine sandpaper described above. Once the floors have been sanded three times, they are ready to be prepared for staining.
STEP 3: Staining
Only after selecting a stain that matches your tastes perfectly, we apply the stain, which includes a seal coat, in a circular motion which we apply evenly to avoid any color inconsistencies. The process is not finished until the desired color is attained. After buffing the floor, we use a tack cloth to clear away dust and debris. At this point the floor will be ready of the first coat of polyurethane, and one step closer to brilliance.
STEP 4: Finishing
The polyurethane is applied using a mop-like tool or a pad applicator. We apply two coats of polyurethane to lock in the stain color and add that special finished look. After a 24 hour drying period, the hardwood floor refinishing process is complete. Your floors will be ready to handle the regular traffic and daily demands that are expected of them.
|Give us a call today to receive a free, no-obligation refinishing price estimate!